ZHC618F-1000W-T-FM Transmitter System-Digital FM Transmitter-Analog Digital FM Transmitter-1000W FM Transmitter

ZHC618F-1000W-T-FM Transmitter System-Digital FM Transmitter-Analog Digital FM Transmitter-1000W FM Transmitter

Short Description:

ZHC618F-1000W/T Compact FM Stereo Transmitter Introduction: This 1KW FM Transmitter uses new DSP + DDS digital technology for FM radio modulation board. It uses the new generation of high efficiency RF LDMOS transistor; low loss lumped filter; high reliability switching power supply and other components all been installed in a 2U height; 19-inch standard chassis. It reduced connection cables between components in common transmitter, so it’s higher reliability and more easy for operation. The...


Product Detail

Product Tags

ZHC618F-1000W/T Compact FM Stereo Transmitter

57

Introduction:

This 1KW FM Transmitter uses new DSP + DDS digital technology for FM radio modulation board. It uses the new generation of high efficiency RF LDMOS transistor; low loss lumped filter; high reliability switching power supply and other components all been installed in a 2U height; 19-inch standard chassis. It reduced connection cables between components in common transmitter, so it’s higher reliability and more easy for operation. The Modular design which form the compact and superior performance of the new 1KW FM radio transmitter. It has unparalleled technical indicators, the audio effects close to CD-quality.

This Transmitter uses modular structure design, it’s easy for maintenance and repairing; it’s using high reliability; wide band switching power supply which is suitable for global power application; the SMT chip can improve the reliability of this Transmitter.

Features:

● High performance; high efficiency; high reliability; small size design.
● The entire transmitter be installed in one 2U height; 19 inch; High-quality stainless steel chassis. Compact structure.
● All-digital technology process DSP+DDS, Achieve CD quality perfect sound effect.
● Analog & Digital (AES/EBU) audio signal input directly, Digital can be priority.
● 1KW power amplifier module uses the newest high-efficiency LDMOS transistor (1400W); it’s using microstrip impedance transformation technology; high efficiency & good consistency, easy for maintenance and replacement.
● Power amplifier radiator uses patented technology design, small wind resistance, large cooling area, high thermal conductivity.
● Using long-life German gale axial fan, high air volume, it can ensure long-term stable operation of the Transmitter.
● Power amplifier uses high reliability switching power supply, large amount of redundancy.
● Switching power supply has protection functions of over voltage, over current, under voltage, over temperature, short circuit, phase loss & lightning strike.
● Transmitter has protection functions of VSWR, over power, over temperature, over voltage, over current and lightning strike.
● All technical parameters can be read through the OLED LCD, intuitive and convenient.
● Power control using closed-loop automatic gain control (AGC), it can ensure the stable output power without drift.
● It uses TCP/IP and RS232 remote control interface, it’s easy to managed by local PC and remote monitoring.

2

 

Technical Specifications:

1. Frequency Range: 87.0MHz~108.0MHz
Setting step 10KHz
2. Output Power:0~1000W
3. Output power deviation:<± 10%
4. Output power stability:<± 1%
5. Output Load Impedance:50Ω
6. RF Output Interface:7/16″(female)/ 7/8” Flange
7. RF efficiency:>75%
8. SFDR:< -70dB
9. High Harmonic:< -65dB
10. Residual Amplitude Modulation:< -50dB
11. Carrier Frequency Precision:±200Hz
12. Analog Audio Input: -12dBm~+8dBm
13. Audio Input Level Gain:-15dB~+15dB, step 0.1dB
14. Audio Input Impedance:600Ω, Balance, XLR
15. AES / EBU input impedance:110Ω, Balance, XLR
16. AES / EBU input level:0.2 ~ 10Vpp
17. AES / EBU sample rate:30kHz ~ 96kHz
18. SCA Input:Unbalance (optional) BNC connector
19. Pre-emphasis:0μS, 50μS, 75μS (optional)
20. Audio Response:±0.1dB (30Hz~15000Hz)
21. LR channel level difference:<0.1dB (100% modulation)
22. Stereo Separation:≥50dB 30Hz ~ 15000Hz
23. Stereo S/N ratio:≥70dB 1KHz, 100% modulation
24. Distortion:<0.1% 30Hz~15000Hz
25. Power supply:AC single-phase 220V / 110V
26. Cooling mode:Forced Convection
27. Temperature Range:-5℃~+45℃
28. Relative humidity:<95%
29. Working Altitude:<4500m
30. Size:2U, 19-inch standard
483mm(W)×88mm(H)×440mm(D)
31. Weight:16KG


  • Previous:
  • Next:

  • Related Products